stm_bm(["menu3b81",900,"","blank.gif",0,"","",0,0,250,200,1000,1,0,0,"","",0,0,1,2,"default","hand","",1,25],this);
stm_bp("p0",[1,4,0,0,0,2,10,7,100,"",-2,"",-2,50,0,0,"#999999","transparent","line.gif",3,0,0,"#000000","up.gif",23,210,0,"transparent","",3,"",-1,-1,0,"transparent","rightline.gif",3,"down.gif",22,210,0,"transparent","",3,"",-1,-1,0,"transparent","leftline.gif",3,"leftup.gif","rightup.gif","rightdown.gif","leftdown.gif",20,20,20,20,20,20,20,20]);
stm_ai("p0i0",[0,"Chemical Storage","","",-1,-1,0,"","_self","","","","",0,0,0,"","",0,0,0,0,1,"#0000FF",0,"#0000FF",0,"","",3,3,0,0,"#FFFFFF #9FD1E0 #9FD1E0 #FFFFFF","#999999","#FFFFFF","#FFFFFF","bold 10pt 'Arial','Verdana'","bold 10pt 'Arial','Verdana'",0,0,"","","","",0,0,0],206,0);
stm_ai("p0i1",[6,1,"#999999","",-1,-1,0]);
stm_aix("p0i2","p0i0",[0,"STORAGE TANKS","","",-1,-1,0,"#","_self","","","dian.gif","dianmove.gif",10,7,0,"black-r.gif","red1-r.gif",7,7,0,0,1,"#FFFFF7",1,"#0000FF",0,"","",3,3,0,0,"#C8E5EE","#000000","#000000","#FFFFFF","bold 9pt 'Arial','Verdana'","italic bold 9pt 'Arial','Verdana'"],206,0);
stm_bp("p1",[1,2,0,0,4,1,10,0,100,"",-2,"",-2,50,0,0,"#999999","#00FFFF","",3,0,0,"#999999"]);
stm_aix("p1i0","p0i0",[0,"Verticals","","",-1,-1,0,"http://www.polyprocessing.com/html/verticals.htm","_self","","","dian1.gif","dianmove.gif",10,7,0,"","",0,0,0,0,1,"#FFFFF7",1,"#FFFFFF",0,"","",3,3,0,0,"#C8E5EE","#000000","#000000","#000000","9pt 'Arial','Verdana'","bold 9pt 'Arial','Verdana'"],130,0);
stm_aix("p1i1","p1i0",[0,"Full Drain IMFO","","",-1,-1,0,"http://www.polyprocessing.com/html/verticals_imfo.htm"],130,0);
stm_aix("p1i2","p1i0",[0,"SAFE-Tanks","","",-1,-1,0,"http://www.polyprocessing.com/html/safe-tanks.htm"],130,0);
stm_aix("p1i3","p1i0",[0,"Cone Bottoms","","",-1,-1,0,"http://www.polyprocessing.com/html/cone_bottoms.htm"],130,0);
stm_aix("p1i4","p1i0",[0,"Open Tops","","",-1,-1,0,"http://www.polyprocessing.com/html/open_tops.htm"],130,0);
stm_aix("p1i5","p1i0",[0,"Horizontals","","",-1,-1,0,"http://www.polyprocessing.com/html/horizontals.htm"],130,0);
stm_aix("p1i6","p1i0",[0,"Basins","","",-1,-1,0,"http://www.polyprocessing.com/html/secondary_containment_basins.htm"],130,0);
stm_aix("p1i7","p1i0",[0,"Miscellaneous","","",-1,-1,0,"http://www.polyprocessing.com/html/miscellaneous.htm"],130,0);
stm_ep();
stm_aix("p0i3","p0i2",[0,"Fittings / Accessories","","",-1,-1,0,"","_self","","","dian.gif","dianmove.gif",10,7,0,"black-r.gif","red1-r.gif",7,7,0,0,1,"#FFFFF7",1,"#0000FF",0,"","",3,3,0,0,"#C8E5EE","#000000","#000000","#FFFFFF","9pt 'Arial','Verdana'"],206,0);
stm_bpx("p2","p1",[]);
stm_aix("p2i0","p1i0",[0,"Flexible Connections","","",-1,-1,0,"http://www.polyprocessing.com/html/flex_connect"],150,0);
stm_aix("p2i1","p1i0",[0,"Sidewall Fittings","","",-1,-1,0,"http://www.polyprocessing.com/html/sidewall_fittings"],150,0);
stm_aix("p2i2","p1i0",[0,"Dome Fittings","","",-1,-1,0,"http://www.polyprocessing.com/html/dome_fittings"],150,0);
stm_aix("p2i3","p1i0",[0,"Fill & Level Assemblies","","",-1,-1,0,"http://www.polyprocessing.com/html/fill_level"],150,0);
stm_aix("p2i4","p1i0",[0,"Manway Covers","","",-1,-1,0,"http://www.polyprocessing.com/html/manways"],150,0);
stm_aix("p2i5","p1i0",[0,"General Drawings","","",-1,-1,0,"http://www.polyprocessing.com/html/fittings.htm"],150,0);
stm_aix("p2i6","p1i0",[0,"Fittings Reference Chart","","",-1,-1,0,"http://www.xpress-link.net/distributors/news/Fitting%20and%20Accessories%20Ref%20Chart.pdf"],150,0);
stm_ep();
stm_aix("p0i4","p0i3",[0,"PPC Catalog","","",-1,-1,0,"http://www.polyprocessing.com/html/product_catalog.html","_self","","","dian.gif","dianmove.gif",10,7,0,"","",0,0],206,0);
stm_aix("p0i5","p0i4",[0,"Chemical Resistance","","",-1,-1,0,"http://www.xpress-link.net/chemsearch.asp"],206,0);
stm_aix("p0i6","p0i3",[0,"CAD Drawings"],206,0);
stm_bpx("p3","p1",[]);
stm_aix("p3i0","p0i3",[0,"Please contact Customer \r\nSupport for the latest \r\nCAD files.","","",-1,-1,0,"","_self","","","dian1.gif","dianmove.gif",10,7,0,"","",0,0,0,0,1,"#FFFFF7",1,"#FFFFFF",0,"","",3,3,0,0,"#C8E5EE","#000000","#000000","#000000"],145,0);
stm_ep();
stm_aix("p0i7","p0i4",[0,"Installation Manual","","",-1,-1,0,"http://www.polyprocessing.com/html/installation_manual.htm"],206,0);
stm_aix("p0i8","p0i2",[0,"TANK SPECIFICATIONS","","",-1,-1,0,""],206,0);
stm_bpx("p4","p1",[]);
stm_aix("p4i0","p3i0",[0,"IMFO (Full Drain) NSF/ANSI 61\r\nHDXLPE Specification","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/IMFO%20Specification%20NSF.doc"],210,0);
stm_aix("p4i1","p3i0",[0,"SAFE-Tank (Dual Wall) NSF/ANSI 61\r\nHDXLPE Specification","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/SAFE-Tank%20Specification%20NSF.doc"],210,0);
stm_aix("p4i2","p3i0",[0,"Vertical NSF/ANSI 61\r\nHDXLPE Specification","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/Vertical%20Specification%20NSF.doc"],210,0);
stm_aix("p4i3","p3i0",[0,"IMFO (Full Drain)\r\nHDXLPE Specification","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/IMFO%20Specification%20Non-NSF.doc"],210,0);
stm_aix("p4i4","p3i0",[0,"SAFE-Tank (Dual Wall)\r\nHDXLPE Specification","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/SAFE-Tank%20Specification%20Non-NSF.doc"],210,0);
stm_aix("p4i5","p3i0",[0,"Vertical\r\nHDXLPE Specification","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/Vertical%20Specification%20Non-NSF.doc"],210,0);
stm_ep();
stm_aix("p0i9","p0i0",[0,"Technical Resources","","",-1,-1,0,"","_self","","","","",0,0,0,"black-r.gif","red1-r.gif",7,7,0,0,1,"#86D8F4",0,"#86D8F4",0,"","",3,3,0,0,"#FFFFFF #9FD1E0 #9FD1E0 #FFFFFF","#999999","#000000","#000000"],206,0);
stm_bpx("p5","p1",[1,2,0,0,4,1,10,7,100,"",-2,"",-2,50,0,0,"#999999","#86D8F4"]);
stm_aix("p5i0","p3i0",[0,"Technical Bulletins","","",-1,-1,0,"#","_self","","","dian1.gif","dianmove.gif",10,7,0,"black-r.gif","red1-r.gif",7,7],145,0);
stm_bpx("p6","p5",[1,1,0,0,4,1,10,0]);
stm_aix("p6i0","p3i0",[0,"ASTM D 1998","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/Astm1998-06.pdf","_self","","","dian1.gif","dianmove.gif",10,7,0,"","",0,0,0,0,0],145,0);
stm_aix("p6i1","p6i0",[0,"OR-1000TM Systems","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/Crosslinked%20Polyethylene%20with%20OR-1000%20System.pdf"],145,0);
stm_aix("p6i2","p6i0",[0,"NSF/ANSI 61","","",-1,-1,0,"http://www.xpress-link.net/news/Technical%20Bulletin%20-%20NSF%2061.pdf"],145,0);
stm_aix("p6i3","p3i0",[0,"Venting:\r\nDesign for ACFM      ","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/Venting.pdf"],145,0);
stm_aix("p6i4","p3i0",[0,"Flexible Connections","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/Technical%20Bulletin%20-%20Flexible%20Connections.pdf"],145,0);
stm_aix("p6i5","p3i0",[0,"Environmental Stress\r\nCrack Resistance","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/Understanding_ESCR.pdf"],145,0);
stm_aix("p6i6","p3i0",[0,"FRP vs. PE Tanks\r\n  Comparison","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/FRPvsRotomoldedPlasticTanks.pdf"],145,0);
stm_aix("p6i7","p3i0",[0,"PE Life Expectancy","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/Polyethylene%20Life%20Expectancy.pdf"],145,0);
stm_aix("p6i8","p3i0",[0,"Polymer Glossary","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/tdpolymergloss.pdf"],145,0);
stm_aix("p6i9","p3i0",[0,"Polyolefins Reference\r\n             Guide","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/tdpolyolefins.pdf"],145,0);
stm_aix("p6i10","p3i0",[0,"Ryton Bolts","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/Ryton_Donkers.pdf"],145,0);
stm_aix("p6i11","p3i0",[0,"Carbon Black \r\n  & Plastics","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/CarbonBlackandPlastics.pdf"],145,0);
stm_aix("p6i12","p3i0",[0,"Explaination of \r\nTank Thickness ","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/Thickness_requirements_ASTM.pdf"],145,0);
stm_ep();
stm_aix("p5i1","p5i0",[0,"How To Resources"],145,0);
stm_bpx("p7","p6",[]);
stm_aix("p7i0","p3i0",[0,"Heat Trace Systems","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/HTDSilcopadManual.pdf"],145,0);
stm_aix("p7i1","p3i0",[0,"Installation Manual","","",-1,-1,0,"http://www.polyprocessing.com/html/installation_manual.htm"],145,0);
stm_aix("p7i2","p3i0",[0,"Painting Polyethylene","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/PaintingPEStorageTanks.pdf"],145,0);
stm_aix("p7i3","p3i0",[0,"Reparing Polyethylene","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/RepairRotomoldedPolyethyleneParts.pdf"],145,0);
stm_aix("p7i4","p3i0",[0,"SAFE-Tank \r\nTransition Fitting","","",-1,-1,0,"http://www.polyprocessing.com/pdf/literature/InstallationManual/7-Transition_Fitting.pdf"],145,0);
stm_aix("p7i5","p3i0",[0,"Standards of\r\nManufacturing","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/StandardsofManufacture.pdf"],145,0);
stm_ep();
stm_aix("p5i2","p5i0",[0,"Resin Information"],145,0);
stm_bpx("p8","p6",[]);
stm_aix("p8i0","p3i0",[0,"OR-1000TM Systems","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/Crosslinked%20Polyethylene%20with%20OR-1000%20System.pdf"],145,0);
stm_aix("p8i1","p3i0",[0,"Resin Data Sheets","","",-1,-1,0,"http://www.polyprocessing.com/html/resindatasheets.htm"],145,0);
stm_ep();
stm_aix("p5i3","p5i0",[0,"Calculations"],145,0);
stm_bpx("p9","p6",[]);
stm_aix("p9i0","p3i0",[0,"Wall Thickness","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/thickness_requirements_for_vertical_tanks.xls"],145,0);
stm_aix("p9i1","p3i0",[0,"Gallons Per Inch","","",-1,-1,0,"http://www.polyprocessing.com/pdf/technical/gallon_per_inch_&_tape.xls"],145,0);
stm_ep();
stm_ep();
stm_aix("p0i10","p0i1",[]);
stm_aix("p0i11","p0i9",[0,"Sales and Marketing","","",-1,-1,0,"","_self","","","","",0,0,0,"","",0,0,0,0,1,"#FFFF00",0,"#FFFF00"],206,0);
stm_aix("p0i12","p0i1",[]);
stm_aix("p0i13","p3i0",[0,"Product Flyers/Video","","",-1,-1,0,"","_self","","","dian.gif","dianmove.gif",10,7,0,"black-r.gif","red1-r.gif",7,7,0,0,1,"#FFFFF7",1,"#FFFF00"],206,0);
stm_bpx("p10","p1",[1,2,0,0,4,1,10,0,100,"",-2,"",-2,50,0,0,"#999999","#FFFF00"]);
stm_aix("p10i0","p3i0",[0,"Product Flyers","","",-1,-1,0,"http://www.polyprocessing.com/html/literature.html"],135,0);
stm_aix("p10i1","p3i0",[0,"Warranty","","",-1,-1,0,"http://www.polyprocessing.com/pdf/literature/Warranty.pdf"],135,0);
stm_aix("p10i2","p3i0",[0,"High Density \r\nCrosslinked PE \r\nDrop/Pressure Video","","",-1,-1,0,"http://www.polyprocessing.com/html/xlpesupport.htm"],135,0);
stm_ep();
stm_aix("p0i14","p0i13",[0,"Tradeshows","","",-1,-1,0,"#","_self","","","dian.gif","dianmove.gif",10,7,0,"black-r.gif","red1-r.gif",7,7,0,0,0],206,0);
stm_bpx("p11","p10",[]);
stm_aix("p11i0","p6i0",[0,"WEFTEC - New Orleans, Louisiana\r\nOctober 4 - 6, 2010 Booth 2737, Hall E\r\nNew Orleans Morial Convention Center","","",-1,-1,0,"http://www.weftec.com/","_self","","click to visit website"],135,0);
stm_aix("p11i1","p11i0",[0,"AWWA - Washington, DC\r\nJune 12 - 16, 2011\r\nWalter E. Washington Convention Center","","",-1,-1,0,"http://www.awwa.org/ACE11/index.cfm"],135,0);
stm_aix("p11i2","p11i0",[0,"WEFTEC - Los Angeles, California\r\nOctober 15 - 19, 2011\r\nLos Angeles Convention Center","","",-1,-1,0,"http://www.weftec.com"],135,0);
stm_aix("p11i3","p11i0",[0,"AWWA - Dallas, Texas\r\nJune 10 - 14, 2012\r\n","","",-1,-1,0,"http://www.awwa.org/Membership/Content.cfm?ItemNumber=502&navItemNumber=1451"],135,0);
stm_aix("p11i4","p11i0",[0,"WEFTEC - New Orleans, Louisiana\r\nSeptember 29 - October 3, 2012\r\nNew Orleans Morial Convention Center","","",-1,-1,0,"http://www.weftec.com/About_WEFTEC/page.aspx?id=35"],135,0);
stm_aix("p11i5","p11i3",[0,"AWWA - Denver, Colorado\r\nJune 9 - 13, 2013"],135,0);
stm_aix("p11i6","p11i4",[0,"WEFTEC - Chicago, Illinois\r\nOctober 5 - 9, 2013\r\nMcCormick Place"],135,0);
stm_aix("p11i7","p6i0",[0,"AWWA - Boston, Massachusetts\r\nJune 8 - 12, 2014","","",-1,-1,0,""],135,0);
stm_aix("p11i8","p11i4",[0,"WEFTEC - New Orleans, Louisiana\r\nOctober 18 - 22, 2014\r\nNew Orleans Morial Convention Center"],135,0);
stm_aix("p11i9","p11i7",[0,"AWWA - Anaheim, California\r\nJune 7 - 11, 2015"],135,0);
stm_ep();
stm_aix("p0i15","p0i13",[0,"Distributor Website","","",-1,-1,0,"http://www.xpress-link.net/distributors/login.asp","_blank","","","dian.gif","dianmove.gif",10,7,0,"","",0,0],206,0);
stm_aix("p0i16","p3i0",[0,"What\'s New!","","",-1,-1,0,"","_self","","","dian.gif","dianmove.gif",10,7,0,"black-r.gif","red1-r.gif",7,7,0,0,1,"#00FF00",0,"#00FF00"],206,0);
stm_bpx("p12","p1",[1,2,0,0,4,1,10,7,100,"",-2,"",-2,50,0,0,"#999999","#00FF00"]);
stm_aix("p12i0","p1i0",[0,"Chemical Specific Guides","","",-1,-1,0,"","_self","","","dian.gif","dianmove.gif",10,7,0,"black-r.gif","red1-r.gif",7,7,0,0,1,"#00FF00",0,"#00FF00"],135,0);
stm_bpx("p13","p12",[1,2,20,0,4,1,10,0]);
stm_aix("p13i0","p12i0",[0,"Ferrics, Alums and Polymers","","",-1,-1,0,"http://www.polyprocessing.com/pdf/literature/PositionStatements/FeAlP.pdf","_self","","","dian1.gif","dianmove.gif",10,7,0,"","",0,0],145,0);
stm_aix("p13i1","p13i0",[0,"Hydrochloric Acid","","",-1,-1,0,"http://www.polyprocessing.com/pdf/literature/PositionStatements/HCl.pdf"],145,0);
stm_aix("p13i2","p13i0",[0,"Hydrofluoric Acid","","",-1,-1,0,"http://www.polyprocessing.com/pdf/literature/PositionStatements/HF.pdf"],145,0);
stm_aix("p13i3","p13i0",[0,"Hydrofluosilicic Acid","","",-1,-1,0,"http://www.polyprocessing.com/pdf/literature/PositionStatements/H2SiF6.pdf"],145,0);
stm_aix("p13i4","p13i0",[0,"Hydrogen Peroxide","","",-1,-1,0,"http://www.polyprocessing.com/pdf/literature/PositionStatements/H2O2.pdf"],145,0);
stm_aix("p13i5","p13i0",[0,"Sodium Hydroxide","","",-1,-1,0,"http://www.polyprocessing.com/pdf/literature/PositionStatements/NaOH.pdf"],145,0);
stm_aix("p13i6","p13i0",[0,"Sodium Hypochlorite","","",-1,-1,0,"http://www.polyprocessing.com/pdf/literature/PositionStatements/NaOCl.pdf"],145,0);
stm_aix("p13i7","p13i0",[0,"Sulfuric Acid","","",-1,-1,0,"http://www.polyprocessing.com/pdf/literature/PositionStatements/H2SO4.pdf"],145,0);
stm_ep();
stm_aix("p12i1","p1i0",[0,"NSF Certified Chemical Storage","","",-1,-1,0,"http://www.polyprocessing.com/pdf/literature/NSFANSI.pdf"],135,0);
stm_aix("p12i2","p1i0",[0,"SAFE-Surge™\r\nMANWAY COVERS","","",-1,-1,0,"http://www.polyprocessing.com/pdf/literature/Safe%20Surge.pdf"],135,0);
stm_aix("p12i3","p1i0",[0,"FLEXIJOINT® Expansion Joint","","",-1,-1,0,"http://www.polyprocessing.com/pdf/literature/FlexibleConnections.pdf"],135,0);
stm_aix("p12i4","p1i0",[0,"B.O.S.S. Fitting™","","",-1,-1,0,"http://www.polyprocessing.com/pdf/literature/B.O.S.S..pdf"],135,0);
stm_aix("p12i5","p1i0",[0,"Tank Specifications","","",-1,-1,0,"http://www.polyprocessing.com/pdf/literature/Tank_Specs.pdf"],135,0);
stm_aix("p12i6","p1i0",[0,"Fitting Specifications","","",-1,-1,0,"http://www.polyprocessing.com/pdf/literature/Fitting_Specs.pdf"],135,0);
stm_ep();
stm_aix("p0i17","p0i0",[0,"Contact Us","","",-1,-1,0,"","_self","","","","",0,0,0,"black-r.gif","red1-r.gif",7,7,0,0,1,"#FF0000",0,"#FF0000"],206,0);
stm_bpx("p14","p1",[1,2,0,-45,4,1,10,7,100,"",-2,"",-2,50,0,0,"#999999","#FF0000"]);
stm_aix("p14i0","p0i2",[0,"Request for Quote","","",-1,-1,0,"http://www.polyprocessing.com/html/equote.htm","_self","","","dian1.gif","dianmove.gif",10,7,0,"","",0,0,0,0,1,"#FFFFF7",1,"#FFFFFF",0,"","",3,3,0,0,"#C8E5EE","#000000","#FFFFFF","#000000"],135,0);
stm_aix("p14i1","p14i0",[0,"Email Request","","",-1,-1,0,"http://www.polyprocessing.com/html/contact.htm"],135,0);
stm_aix("p14i2","p14i0",[0,"Phone Numbers","","",-1,-1,0,"","_self","","","dian1.gif","dianmove.gif",10,7,0,"black-r.gif","red1-r.gif",7,7],135,0);
stm_bpx("p15","p14",[1,1,0,-55,4,1,10,0]);
stm_aix("p15i0","p0i0",[0,"   Toll Free:\r\n866.590.6845","","",-1,-1,0,"","_self","","","dian1.gif","dianmove.gif",10,7,0,"","",0,0,0,0,1,"#FFFFF7",1,"#FFFFFF",0,"","",3,3,0,0,"#C8E5EE","#000000","#FFFFFF","#000000","bold 9pt 'Arial','Verdana'","bold 14pt 'Arial','Verdana'"],135,0);
stm_aix("p15i1","p15i0",[0,"      Fax:\r\n318.343.9679"],135,0);
stm_ep();
stm_ep();
stm_aix("p0i18","p0i1",[]);
stm_ep();
stm_sc(1,["transparent","transparent","","",3,3,0,0,"#FFFFF7","#000000","up_disabled.gif","up_enabled.gif",7,9,0,"down_disabled.gif","down_enabled.gif",7,9,0,0,100]);
stm_em();